Skip to Main Content Skip to Footer Content

Main Content Starts Here

Receptacles

Showing 1 - 7 of 7 Items

filter_alt Filters (2)

Sort By

Per Page

Littelfuse

Russellstoll

Brand (2)

Brand (2)

Sort By

Per Page

RUSSELL STOLL

FS/FD Metallic Connection- 20-30 Amp, 600VAC-250VAC, Aluminum Female Receptacle with box, 3 Pole 4 Wire

3754 Russellstoll Receptacle Box Assembly, 250/600 VAC, 20 A, 3 Poles, 4 Wires

MFR: ABB - Installation Products

MFR #: 3754

UPC: 708917189404

Item #: 227148

RUSSELL STOLL

MaxGard Female Flap Cap Connector, 200 Amp, 3 Pole 4 Wire, 30 480V, 60Hz

DF2404FP000 Russellstoll MaxGard Female Pin and Sleeve Connector With Flap Cap, 480 V AC, 200 A, 3 Poles, 4 Wires

MFR: ABB - Installation Products

MFR #: DF2404FP000

UPC: 708917158264

Item #: 171639

RUSSELL STOLL

MaxGard Female Replacement Interior Assembly, 200 Amp, 3 Pole 4 Wire, 30 480V, 60Hz

DFRU2404 Russellstoll MaxGard Replacement Interior Assembly, 480 VAC, 200 A, 3 Poles, 4 Wires, Female Socket Connector

MFR: ABB - Installation Products

MFR #: DFRU2404

UPC: 708917138693

Item #: 163621

RUSSELL STOLL

DuraGard 50 Amp Reverse Service Female Plug- through 600V AC/250V DC

9R54U0W Russellstoll DuraGard Reverse Service Waterproof Female Receptacle, 600 VAC, 250 VDC, 50 A, 3 Poles, 4 Wires

MFR: ABB - Installation Products

MFR #: 9R54U0W

UPC: 708917146872

Item #: 369031

Littelfuse

No Image Available

SB5100-021-0 SB5000 Standard Ground-Fault Circuit Interrupter, 208 V AC, 100 A

MFR: Littelfuse

MFR #: SB5100-021-0

UPC: 079458313901

Item #: 1553505

Littelfuse

Special-Purpose Ground-Fault Circuit Interrupter (SPGFCI), Class C and Class D: Industrial Shock Block (ISB) is a personnel protection device designed to meet the requirements for special-purpose GFCIs defined by UL 943C. This standard outlines GFCI classes specifically designed for use in industrial facilities. Class C GFCIs are intended to be used on three-phase systems where the line-to-line voltage is 480 V or less with a trip level of 20 mA, while Class D GFCIs are intended to be used on 600 V systems. The Industrial Shock Block includes DFT harmonic filtering, an automatic self-test feature and is compliant to the UL 1998 Software in Programmable Components standard. Ground-Fault Circuit Interrupter (GFCI), Class A: The Shock Block is available as a 208 V Class A GFCI, allowing commercial kitchens, construction sites, and other non-dwelling units with wet areas to meet NEC 210.8(B) for their 3-phase loads up to 60 A. Equipment Ground-Fault Protective Device (EGFPD): Industrial Shock Block is also available with adjustable protection settings as an EGFPD. The EGFPD models can be set to trip at 6 mA or from 10100 mA in increments of 10 mA. This offers more flexibility since GFCI devices are not allowed to have an adjustable trip level. Rating and Models: Industrial Shock Block (GFCI & EGFPD) is available for threephase voltages from 208 to 600 V with a maximum full load current of either 32 or 60 A. The power system can be either solidly or high-resistance grounded and the load must be three phase without a neutral. The standard enclosure is IP 69K/NEMA 4X and outdoor rated, suitable for all industrial environments including hightemperature washdown used in food production. A Class II, Division 2 option is also available for applications where explosive dust may be present. Ground Wire (Load-Ground) Monitor: The Industrial Shock Block also monitors the ground wire (load-ground) connection between the Industrial Shock Block and load. This is a required feature for Class C and D GFCI devices and is recommended for Class A GFCI and EGFPD devices. If the ground-return path is broken, the Industrial Shock Block will trip and provide an alarm by changing the state of the alarm contacts. This monitoring circuit includes an extra wire (pilot wire) between the Industrial Shock Block and load. At the load, the pilot wire is connected to a termination device. The other end of the termination device is connected to the load ground (typically the enclosure).

Shock Block Class A GFCI, 208V, 60A

MFR: Littelfuse

MFR #: SB5060-021-0

UPC: 079458294552

Item #: 1637840

Littelfuse

Special-Purpose Ground-Fault Circuit Interrupter (SPGFCI), Class C and Class D: Industrial Shock Block (ISB) is a personnel protection device designed to meet the requirements for special-purpose GFCIs defined by UL 943C. This standard outlines GFCI classes specifically designed for use in industrial facilities. Class C GFCIs are intended to be used on three-phase systems where the line-to-line voltage is 480 V or less with a trip level of 20 mA, while Class D GFCIs are intended to be used on 600 V systems. The Industrial Shock Block includes DFT harmonic filtering, an automatic self-test feature and is compliant to the UL 1998 Software in Programmable Components standard. Ground-Fault Circuit Interrupter (GFCI), Class A: The Shock Block is available as a 208 V Class A GFCI, allowing commercial kitchens, construction sites, and other non-dwelling units with wet areas to meet NEC 210.8(B) for their 3-phase loads up to 60 A. Equipment Ground-Fault Protective Device (EGFPD): Industrial Shock Block is also available with adjustable protection settings as an EGFPD. The EGFPD models can be set to trip at 6 mA or from 10100 mA in increments of 10 mA. This offers more flexibility since GFCI devices are not allowed to have an adjustable trip level. Rating and Models: Industrial Shock Block (GFCI & EGFPD) is available for threephase voltages from 208 to 600 V with a maximum full load current of either 32 or 60 A. The power system can be either solidly or high-resistance grounded and the load must be three phase without a neutral. The standard enclosure is IP 69K/NEMA 4X and outdoor rated, suitable for all industrial environments including hightemperature washdown used in food production. A Class II, Division 2 option is also available for applications where explosive dust may be present. Ground Wire (Load-Ground) Monitor: The Industrial Shock Block also monitors the ground wire (load-ground) connection between the Industrial Shock Block and load. This is a required feature for Class C and D GFCI devices and is recommended for Class A GFCI and EGFPD devices. If the ground-return path is broken, the Industrial Shock Block will trip and provide an alarm by changing the state of the alarm contacts. This monitoring circuit includes an extra wire (pilot wire) between the Industrial Shock Block and load. At the load, the pilot wire is connected to a termination device. The other end of the termination device is connected to the load ground (typically the enclosure).

SB5060-011-0 SB5000 Series Industrial Shock Block, 208 V, 60 A

MFR: Littelfuse

MFR #: SB5060-011-0

UPC: 079458294521

Item #: 1359601