Testing and Measuring Instruments | Crescent Electric Supply Company

Amprobe

VP-440 Non-Contact Voltage Detector Probe, 50 to 1000 V AC, Light Indicator, CAT IV 1000 V

MFR: Fluke

MFR #: VP-440

UPC: 095969369312

Item #: 82897

Amprobe

TIC-300-PRO-KIT Non-Contact High Voltage Detector, 30 to 122000 V AC, Flashing Light/Beep Indicator

MFR: Fluke

MFR #: TIC-300-PRO-KIT

UPC: 095969915007

Item #: 1212703

Amprobe

Easily check and confirm proper wiring of electrical receptacles with this Receptacle Tester. Quickly confirm that GFCI breakers are properly wired for protection.

ST-102B GFCI Receptacle Tester, 110 to 125 V AC

MFR: Fluke

MFR #: ST-102B

UPC: 095969625005

Item #: 57075

Amprobe

If an industrial or utility testing application demands a higher level of safety, reach for this CAT IV rated Clamp Meter, the ACDC-3400 IND. Including true-rms sensing for accuracy this clamp on meter's extra large jaws can clamp on to those wide diameter wires making taking measurements in industrial environments simple.

ACDC-3400-IND AC/DC Digital True RMS Clamp-On Meter, 660 to 1000 A, 660 to 750 V AC, 660 to 1000 V DC, 660 mV AC/mV DC, 6.6 to 660 kOhm/6.6 to 66 MOhm, 50 to 500 Hz, 2 in Jaw, 3 Digits Backlit LCD Display

MFR: Fluke

MFR #: ACDC-3400-IND

UPC: 095969492683

Item #: 411689

Amprobe

ACD-10-PLUS AC/DC Digital Clamp Multimeter for Capacitance and Frequency

MFR: Fluke

MFR #: ACD-10-PLUS

UPC: 095969417457

Item #: 133310

Amprobe

AM-530 True-RMS Electrical Contactor Digital Multimeter

MFR: Fluke

MFR #: AM-530

UPC: 095969600392

Item #: 15067

Amprobe

Rugged and reliable for utility, industrial and mine safety applications, the TIC 300 PRO with VolTect is a Non-Contact, High Voltage Detector that verifies the presence of voltage in low, medium and high voltage test applications up to 122 kV without contacting the energized conductor.

TIC-300-PRO Non-Contact High Voltage Detector, 30 to 1500/1500 to 122000 V AC, LED Indicator

MFR: Fluke

MFR #: TIC-300-PRO

UPC: 095969497695

Item #: 56324

Panduit

VS-CKP14-6 VeriSafe AVT Connection Kit, For Use With Insulation Piercing Connector

MFR: Panduit

MFR #: VS-CKP14-6

UPC: 613056566903

Item #: 834360

Amprobe

If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.

PRM-6 Phase Sequence and Motor Rotation Tester Motor Rotation-Phase Sequence Indicator, 700 V AC, Backlit LCD Display

MFR: Fluke

MFR #: PRM-6

UPC: 095969680288

Item #: 392321

Amprobe

AM-220 True-RMS AC/DC Clamp Meter, 600 Amp

MFR: Fluke

MFR #: AMP-220

UPC: 095969770866

Item #: 385200

Panduit

VS-CKP4-000 VeriSafe AVT Connection Kit, For Use With Insulation Piercing Connector

MFR: Panduit

MFR #: VS-CKP4-000

UPC: 613056566910

Item #: 834384

Amprobe

AF-600 A-Frame Ground Fault Detector, Audio Indicator, CAT IV 600 V

MFR: Fluke

MFR #: AF-600

UPC: 095969873734

Item #: 1110949

Amprobe

AMB-55 Industrial High Voltage Insulation Resistance Tester, 0 to 600 V AC/DC, 300 kOhm, +/-5% RDG + 3 Digits, +/-15% RDG + 3 Digits Accuracy, LCD Display, CAT III 600 V

MFR: Fluke

MFR #: AMB-55

UPC: 095969557009

Item #: 130485

Amprobe

Test insulation of wires, cables, transformers and electrical motors quickly and easily with this rugged tester.

AMB-45 Insulation Resistance Tester, 600 V AC/DC, 4000 Ohm/400 MOhm, +/-1% RDG + 5 Digits Accuracy, LCD Display, CAT III 600 V, CAT II-1000 V

MFR: Fluke

MFR #: AMB-45

UPC: 095969366120

Item #: 55323

Amprobe

Optimize the placement of solar systems and verify window efficiency. This measures solar output that is used to calculate overall energy, efficiency and placement of solar systems.

SOLAR-100 Solar Power Meter, 1999 W/sq-m/634 Btu/(sq-ft x h) Measuring, +/-10 W/sq-m +/-3 Btu/(sq-ft x h) or +/-5% Accuracy, 40 to 104 deg F, 3-1/2 Digits LCD Display

MFR: Fluke

MFR #: SOLAR-100

UPC: 095969499217

Item #: 128775

Amprobe

LAN-1 LAN Cable Tester, LED Display

MFR: Fluke

MFR #: LAN-1

UPC: 095969419345

Item #: 80876

Panduit

VeriSafe Replacement AVT System Cable, 8

VS-AVT-CABLE-08 VeriSafe Power/Signal Replacement Cable, 8 ft L, For Use With 1/3-Phase AC AVT System

MFR: Panduit

MFR #: VS-AVT-CABLE-08

UPC: 613056257627

Item #: 1110038

Amprobe

TEST LEADS,ALLIGATOR CLIPS,HD DMMS, CAT IV 1000V

TL1500 Heavy Duty Test Lead, 1.5 kV AC, 250 mm OAL

MFR: Fluke

MFR #: TL1500

UPC: 095969362467

Item #: 577574

Amprobe

TMD-50 Digital Thermocouple Thermometer, K Thermocouple, 2 Inputs, -328 to 1999 deg F/-200 to 1372 deg C, +/-0.1% Accuracy, LCD Display

MFR: Fluke

MFR #: TMD-50

UPC: 095969556842

Item #: 397314

Amprobe

Infrared Thermometer, Temperature Range: -32 To 1050 DEG C, Focus Spot Size And Distance: 20:1, Accuracy: Plus/Minus1.8 PCT, Resolution: 0.1 DEG C/0.1 DEG F, Spectral Response: 8 - 14 UM, Laser Sighting: 630 - 670 NMTR, Response Time: 250 MS, Emissivity: 0.95, Repeatability: Plus/Minus0.5 PCT Of Reading Or Plus/Minus1 DEG F (Plus/Minus0.5 DEG C), Whichever Is Greater, Display: LCD, Included: Carrying Bag, Battery And Instruction Manual, Ambient Temperature Range: 0 - 40 DEG C, Battery Type: 9V (6F22 Alkaline), Memory Recall: Min/Max, Dimensions: 138 MM Length X 53 MM Width X 169 MM Height, Battery Life: 10 HR With Laser And Backlight On, 30 HR With Laser And Backlight Off

IR-720 IR-700 Infrared Thermometer, -26 to 1922 deg F, +/-1.8% RDG, 0.95, 9V Battery

MFR: Fluke

MFR #: IR-720

UPC: 095969614337

Item #: 939710

Amprobe

IR-450 3-in-1 Infrared Pocket Thermometer, -22 to 932 deg F/-30 to 500 deg C, +/-2 deg F, +/-1 deg C Accuracy, 0.95, AAA Battery

MFR: Fluke

MFR #: IR-450

UPC: 095969642552

Item #: 54683

Amprobe

Complete with a full range of diagnostic capabilities including phase sequence, power and power factor, total harmonics distortion and individual harmonics, inrush current and low pass filter, the Amprobe Navigator Clamp On Meter serves as a first line of defense for power monitoring and verifying system conditions before deploying more specialized tools -- or incurring additional costs. Rated CAT IV 600 V/CAT III 1000 V, these clamp on meters offer a new innovative navigation system that eliminates confusing push buttons, and replaces them with a single joystick. Its all about easy and reliable measurements. Amprobes new line of Navigator Clamp On Meters feature quick, easy to use single hand selection of measurements. The joy stick control allows quick selection of measurement features on the display from MAX -MIN to power factor to AC- DC current, with many more available. Simply highlight the desired measurement feature using the joy stick and press to select. Rugged and CAT IV reliable, this clamp on meter also features, super bright backlight display, built-in jaw flashlight and over mold bodies to absorb shock -- all you need for commercial and industrial environments.

ACDC-54NAV Navigator AC/DC True RMS Clamp-On Power Meter, 100 to 1000 A AC/DC, 100 to 1000 V AC/DC, 1 to 100 kOhm, 20 Hz to 10 kHz, 1.6 in Jaw, Large Backlit LCD Display

MFR: Fluke

MFR #: ACDC-54NAV

UPC: 095969556675

Item #: 160820

Amprobe

Low Current Clamp On Ammeter, Amperage Rating: AC DC: 4 AMP, 40 AMP, Frequency Rating: 40 HZ - 400 HZ In AC, Measuring Range: 0 - 40 AMP DC Or AC Peak, Operating Temperature: 0 - 50 DEG C, Dimensions: 184 MM Length X 71 MM Width X 31 MM Height, Battery Type: 9 V, Alkaline PP3, NEDA 1604, Display: 4000 Count,10 MM High Characters, Maximum Jaw Opening: 19 MM Cable, Maximum Jaw Opening: 20 MM, Accuracy: Plus-Minus (1.3PCT + 5 Digits), Temperature coefficient: Plus-Minus 0.05PCT Of RDG-DEGC, Resolution: 1 MILAMP In 4 AMP Range, 10 MILAMP In 40 AMP Range, Autoranging: 4 AMP-40 AMP, CE Certified, CAT III 300V

LH41A Digital Low Current Clamp-On Ammeter, 4 to 40 A, 40 to 400 Hz, 0.78 in Jaw, LCD Display

MFR: Fluke

MFR #: LH41A

UPC: 095969416542

Item #: 783715

Amprobe

AC50A AC Leakage Current Clamp-On Meter, 40 to 400 mA, 4 to 60 A, 400 V AC, 400 Ohm, 50/60 Hz, 40 Hz to 1 kHz, 1.2 in Jaw, 3-3/4 Digits LCD Display

MFR: Fluke

MFR #: AC50A

UPC: 095969416719

Item #: 764819

Amprobe

DGC-1000A Clamp-On Ground Resistance Tester, 10 A, Large Digital LCD Display, 9 V DC Battery

MFR: Fluke

MFR #: DGC-1000A

UPC: 095969366311

Item #: 194199

Amprobe

True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus-Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus-Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus/Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus-Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus-Minus (1 PCT RDG + 3 LSD) For Resistance, Plus-Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus-Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use

ACD-50NAV Navigator AC True RMS Clamp-On Power Meter, 100 to 600 A, 100 to 1000 V AC/DC, 1 to 100 kOhm, 20 Hz to 10 kHz, 45 mm Jaw, Large Backlit LCD Display

MFR: Fluke

MFR #: ACD-50NAV

UPC: 095969556637

Item #: 158794

Amprobe

AMP-25 AC/DC Mini-Clamp True RMS Clamp-On Meter, 60 to 300 A AC/DC, 1 in Jaw, Backlit LCD Display

MFR: Fluke

MFR #: AMP-25

UPC: 095969778787

Item #: 390952

Panduit

Verisafe Replacement AVT System Cable, 3

VS-AVT-CABLE-30 Replacement Cable, 30 ft L, For Use With VeriSafe AVT System

MFR: Panduit

MFR #: VS-AVT-CABLE-30

UPC: 613056364721

Item #: 977644

Panduit

VeriSafe??? Insulation Piercing Connecti

VS-CKP1K4/0-500 Insulation Piercing Connection Kit, For Use With Tapping AWG 4/0 to 500 MCM Copper Conductors

MFR: Panduit

MFR #: VS-CKP1K4/0-500

UPC: 613056812994

Item #: 1284054

Amprobe

Contact And Non-Contact Tachometer, Range: Surface Speed (Contact): 1 - 9999.9 M/MINT, 3 - 30,000 FT-MINT, 1 - 10,000 YD-MINT, Resolution: RPM Unit: 0.001,0.01,0.1,1, M-MINT Unit: 0.0001,0.001,0.01,0.1, Ft-MINT Unit: 0.0001, 0.001, 0.01, 0.1: YD-MINT Unit: 0.0001, 0.001, 0.01, 0.1, Rpm Range: Rotation (Non-Contact): 10 - 99999 RPM Rotation (Contact): 10 - 19999 RPM, Accuracy: Plus- Minus (0.1 PCT Of RDG + 2 Digit), Display: LCD With 15 MM Height X 33 MM Width, Working Distance: 5 - 30 CM (Non Contact), Parts Included: Meter, 9 V Battery, Cone And Funnel Contact Tips, Reflective Tape And Users Manual, Measuring Units: M, FT, YD, Dimensions: 266.6 MM Length X 177.8 MM Width X 81.28 MM Height, Battery: 9 V, Power Consumption: 5 MICAMP (Idle), 18 MILAMP (Measurement), Operating Temperature: 0 - 50 DEG C, CE Certified

TACH-10 Combo Tachometer, +/- 0.1% RDG, +/- 2 Digits Accuracy, 5 to 30 cm, Infrared, Digital LCD Display

MFR: Fluke

MFR #: TACH-10

UPC: 095969556699

Item #: 774607

Amprobe

Specifically designed for electrical, HVAC, mechanical, automotive applications with a temperature measurement range of 14 F to 932 F (-10 C to 500 C). Portable, ergonomic, and easy to operate, allows for quick and accurate identification of temperature related issues for electrical connections and motors, HVAC functionality and performance, and heat loss spots on the insulation around buildings to save energy costs.

IRC-110 Infrared Camera Thermal Imager, 14 to 932 deg F

MFR: Fluke

MFR #: IRC-110

UPC: 095969853835

Item #: 788040

Amprobe

This Anemometer with Flexible Precision Vane is ideal for HVAC technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems. It offers numerous functionsuse it to check air velocity FPM (feet per minute), air volume (flow) CFM (Cubic feet per minute) plus the remote vane allows greater measurement location flexibility. Switch between C and F. Input the area of airflow measurement to gain accurate air velocity results. Measure an air flow source for a continuous moving average for up to two hours. Determine minimum, maximum and average readings from a single point air source. Large dual display allows views of both air flow and velocity measurements plus temperature. Long extended flexible cord for remote vane access capabilities. All the measurements can be output to a computer for charting or analysis by optional model TM-SWA software and RS232 cable. Shipped in a deluxe hard carry case to protect and transport your Anemometer.

TMA10A Anemometer With Flexible Precision Vane, 0.4 to 25 m/s, +/-2% of Full Scale Accuracy, 32 to 122 deg F, Dual 4-Digits 9999 Counts LCD Display, 0.01 to 99.99 cu-m/s Flow Rate

MFR: Fluke

MFR #: TMA10A

UPC: 095969398886

Item #: 421277

Amprobe

TMA5 Mini-Vane Anemometer, 0.5 to 44.7 mph, 60 to 3937 fpm, 0.4 to 38.8 knot, 1.1 to 20.0 m/s, 0.7 to 72.0 kph, 1 to 8 BF, +/-5 % Accuracy, 32 to 122 deg F, LCD Display

MFR: Fluke

MFR #: TMA5

UPC: 095969516150

Item #: 129392

Amprobe

ELS2A AC Outlet Line Splitter, 120 V AC, 15 A Max Input

MFR: Fluke

MFR #: ELS2A

UPC: 095969414852

Item #: 172992

Amprobe

This rugged and reliable clamp meter is designed for professional electrician and technician that need a fast responding, feature packed, go-to clamp meter. This meter offers a complete range of measuring functions for both HVAC and electrical applications. This modern Clamp Meter features a large low-light backlit LCD dual display for dimly lit areas and is capable of simultaneously displaying voltage and amperage to perform voltage drop tests. This meter offers TRMS, low pass filter, in-rush current, frequency, resistance, capacitance, temperature, DC micro-Amps, Amp-tip and non-contact voltage detection.

ACD-14-PRO Digital Dual Display Clamp-On Multimeter, 2000 uA, 600 A, 600 V AC/DC, 6000 kOhm, 5 to 999.9 Hz, 1.18 in Jaw, Dual LCD Display

MFR: Fluke

MFR #: ACD-14-PRO

UPC: 095969806275

Item #: 557457

Amprobe

HD110C Heavy Duty Digital Multimeter, 2 to 1500 V DC/200 mV DC/2 to 1000 V AC/200 mV AC, 200 uA, 2 to 200 mA, 2 A, 200 Ohm, 2 to 200 kOhm, 2 to 20 MOhm, LCD Display

MFR: Fluke

MFR #: HD110C

UPC: 095969353250

Item #: 380968

Amprobe

The ultimate electronic component verifier measures inductance, capacitance, resistance, transistors, diodes and microwave diodes.

LCR55A Handheld Capacitance Tester, 3/7 V DC, 0.6/1 mA, 10/100/1000 Hz, 20 to 200 Ohm, 2 to 20 kOhm, 2 to 20 MOhm

MFR: Fluke

MFR #: LCR55A

UPC: 095969414753

Item #: 588394

Amprobe

HVAC Digital Multimeter, Voltage Rating: AC: 40 MILV, 4 V, 40 V, 400 V,600 V - DC: 400 MILV, 4 V, 40 V, 400 V, 600 V, Amperage Rating: 400 MICAMP, 4000 MICAMP, 40 MILAMP, 400 MILAMP, 4 AMP, 10 AMP, Frequency Rating: 10 HZ - 10 MHZ, Resistance: 400 OHM, 4 KOHM, 40 KOHM, 400 KOHM, 4 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, 4000 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.8 PCT RDG + 1LSD )For DC Voltage, Plus-Minus (1.2PCT RDG + 3LSD) For DC Current Plus-Minus (1.2 PCT RDG + 3LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 4000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 600 V, N10140, For HVAC Professional

AM-520 Digital Multimeter, 4 to 600 VAC/VDC, 400 mVAC/mVDC, 400 to 4000 uA, 40 to 400 mA, 4 to 10 A, 400 Ohm/4 to 400 kOhm/4 to 40 MOhm, Backlit LCD Display

MFR: Fluke

MFR #: AM-520

UPC: 095969600385

Item #: 454451

Amprobe

MO-100 Digital MilliOhm Meter, LCD Display, (8) 1.5 V DC AA Alkaline Batteries

MFR: Fluke

MFR #: MO-100

UPC: 095969499194

Item #: 420416

Amprobe

ACD-14-TRMS-PLUS Digital Dual Display True RMS Clamp-On Multimeter With Test Leads, 40 to 600 A, 4 to 600 V AC/DC, 400 mV DC, 400 Ohm/4 to 400 kOhm/4 to 40 MOhm, 40 to 400 Hz with Jaw, 10 Hz to 100 kHz with Test Leads, 1.1 in Jaw

MFR: Fluke

MFR #: ACD-14-TRMS-PLUS

UPC: 095969436090

Item #: 142294

Amprobe

ACD-14 PLUS,DUAL DISPL DIGIT CLAMP-ON MM

ACD-14-PLUS True RMS Clamp Multimeter, 4 to 600 V AC/40 A to 600 A, 400 Ohm to 40 MOhm, 50/60 Hz, 28 mm Jaw, Dual Digital LCD Display

MFR: Fluke

MFR #: ACD-14-PLUS

UPC: 095969436083

Item #: 773424

Amprobe

THWD-3 Relative Humidity and Temperature Meter, 0 to 100 % Humidity, +/-3%, +/-5% Accuracy, -4 to 140 deg F, 2.1 in W, Plastic

MFR: Fluke

MFR #: THWD-3

UPC: 095969416726

Item #: 103175

Amprobe

Industrial Digital Multimeter With True-Rms, Voltage Rating: AC: 6 V, 60 V, 600 V, 1000 V DC: 600 MILV, 6 V, 60 V, 600 V, 1000 V, Amperage Rating: 600 MICAMP, 6000 MICAMP, 60 MILAMP, 500 MILAMP, 10 AMP, Frequency Rating: 60 HZ, 600 HZ,6 KHZ, 60 KHZ, 600 KHZ,6 MHZ, 60 MHZ, Resistance: 600 OHM, 6 KOHM, 60 KOHM, 600 KOHM, 6 MOHM, 60 MOHM, Capacitance: 60 NFD, 600 NFD, 6 MFD, 60 MFD, 600 MFD, 6000 MFD,60 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.5 PCT RDG + 2LSD )For DC Voltage, Plus-Minus (1PCT RDG + 2LSD) For DC Current Plus-Minus (1.2 PCT RDG + 5LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 6000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 1000 V CAT III 600 V, N10140, For Professional Electricians Use

AM-570 Full Size Industrial Digital Multimeter, 6 to 1000 VAC/VDC, 600 mVDC, 600 to 6000 uA, 60 to 500 mA, 10 A, 600 Ohm/6 to 600 kOhm/6 MOhm/60 MOhm, Backlit LCD Display

MFR: Fluke

MFR #: AM-570

UPC: 095969640862

Item #: 436228

Amprobe

If youre looking for a versatile clamp-on amp meter for electrical motor maintenance and HVAC testing in high voltage industrial environments, this Clamp Meter is the best clamp meter for the job. It is the best clamp meter in the AMP-300 Series line including all the features of the AMP-320 plus a work light, peak hold, CAT IV 600 V, CAT III 1000 V safety rating and large 2.0 inch (51 mm) jaw. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC DC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, and continuity.

AMP-330 AC/DC Digital True RMS Clamp-On Meter With Motor Testing, 0 to 600 A, 0 to 1000 V AC, 0 to 600 V DC, 0 to 60 kOhm, 5 to 999.9 Hz, 2 in Jaw, 3-5/6 Digits Large Backlit LCD Display

MFR: Fluke

MFR #: AMP-330

UPC: 095969770897

Item #: 436231

Amprobe

AM-210 True-RMS AC Clamp Meter, 600 Amp

MFR: Fluke

MFR #: AMP-210

UPC: 095969770859

Item #: 557480

Amprobe

Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC-DC current, AC- DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.

AMP-320 AC/DC True RMS Clamp-On Meter, 0 to 600 V AC/DC, 0 to 60 kOhm, 5 to 999.9 Hz, 1.37 in Jaw, Large Backlit LCD Display

MFR: Fluke

MFR #: AMP-320

UPC: 095969770880

Item #: 446855

Amprobe

UAT-505 UAT-500 Underground Utilities Locator Kit, 20 ft Measuring, +/-5 % Accuracy, Power Source: (4) 1.5 V DC Batteries, LCD Display

MFR: Fluke

MFR #: UAT-505

UPC: 195112014967

Item #: 1278518

Amprobe

Manage all your underground locating needs with the feature-packed UAT-600 Series, designed to accurately pinpoint underground utilities and buried services up to 20 feet deep. Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications. The CAT IV 600 V rating ensures safety when working with energized cables. The locating kit comes complete and ready for use. Includes a signal clamp accessory in addition to the main components.

UAT-620 Underground Utilities Locator Kit, 20 ft Measuring, +/-10 % Accuracy, (6) 1.5 V DC AA Alkaline Batteries Receiver, (8) 1.5 V D-Cell Batteries Transmitter, LCD Display

MFR: Fluke

MFR #: UAT-620

UPC: 095969873727

Item #: 992740

Filters