Power Tools and Attachments | Crescent Electric Supply Company

Greenlee

Quick Change Carbide Tipped Hole Cutter 7/8" (22.2 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

645-7/8 Quick-Change Hole Cutter, 7/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor

MFR: Greenlee

MFR #: 645-7/8

UPC: 783310056959

Item #: 160662

Greenlee

Cobalt-steel pilot drill with split-point tip to prevent walking. For sizes 5/8" - 2-1/4". Use with 645-011 Arbor.

645-001 Pilot Drill Bit, 1/4 in Shank, 5/8 in Pilot Drill, Cobalt Steel

MFR: Greenlee

MFR #: 645-001

UPC: 783310057611

Item #: 80523

Greenlee

Glo Stix Kit 5/32" x 18' (4.0mm x 5.5m) with Bullet and "J" Hook Nose Tips. Fish Stix Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. More flexible for fishing in walls through outlet box holes. Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4" (6.4 mm) Fish Stix. Clear, non-metalic storagetube keeps Glo Stix charged and ready to use. 200 lbs. (0.9 kN) maximum pulling strength. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip.

540-18 Glo Stix Kit, 18 ft L, 5/32 in Dia Pole, Fiberglass, Green

MFR: Greenlee

MFR #: 540-18

UPC: 783310867968

Item #: 161221

Greenlee

Quick Change Carbide Tipped Hole Cutter 1-3/8" (34.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

645-1-3/8 Quick-Change Hole Cutter, 1-3/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor

MFR: Greenlee

MFR #: 645-1-3/8

UPC: 783310057000

Item #: 39378

Greenlee

Quick Change Carbide Tipped Hole Cutter Kit. Includes 7/8", 1-1/8", 1-3/8" and 2" Cutter Heads, Arbor, Hex Key and Case. Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

660 Quick Change Hole Cutter Kit, 5 Pieces, Carbide Tip, Bright

MFR: Greenlee

MFR #: 660

UPC: 783310057666

Item #: 121713

Greenlee

Ultra Cutter 1-1/8" (28.6 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

925-1-1/8 Ultra Hole Saw, 1-1/8 in Dia, 1/4 in D Cutting, Carbide Cutting Edge, 3/8 in Arbor

MFR: Greenlee

MFR #: 925-1-1/8

UPC: 783310101581

Item #: 167407

Greenlee

Small Arbor with Pilot Drill for 7/8 to 1-7/32 Size Cutter

925-011 Small Hole Saw Arbor With Pilot Drill, 3/8 in Arbor, 3/8 in Shank, 3/16 in Dia x 1-1/2 in L Pilot Drill, HSS

MFR: Greenlee

MFR #: 925-011

UPC: 783310101635

Item #: 170638

Greenlee

Ultra Cutter 7/8" (22.5 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

925-7/8 Ultra Hole Saw, 7/8 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 3/8 in Arbor

MFR: Greenlee

MFR #: 925-7/8

UPC: 783310101574

Item #: 166737

Greenlee

Nail Eater Extreme 7/8" (22.2 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.

66PT-7/8 Extreme Drill Bit, 7/8 in Dia, 18 in OAL, 7/16 in Shank

MFR: Greenlee

MFR #: 66PT-7/8

UPC: 783310309277

Item #: 164547

Greenlee

Quick change arbor allows youto change cutter heads with a simple push and a turn use the same arbor for different size cutting heads.

645-011 Quick Change Hole Saw Arbor, 3/8 in Shank

MFR: Greenlee

MFR #: 645-011

UPC: 783310057529

Item #: 160518

Greenlee

Combination Drill/Tap Bits. 10-32NF. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

DTAP10-32 Quick-Change Standard Length Combination Drill and Tap, 2B Class of Fit, 1-1/4 in L Drill, #10-32 NF Thread

MFR: Greenlee

MFR #: DTAP10-32

UPC: 783310176145

Item #: 45867

Greenlee

Combination Drill/Tap Bits. 6-32NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

DTAP6-32 Split Drill

MFR: Greenlee

MFR #: DTAP6-32

UPC: 783310176114

Item #: 143473

Greenlee

Combination Drill/Tap Bits. 8-32NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

DTAP8-32 Split Drill

MFR: Greenlee

MFR #: DTAP8-32

UPC: 783310176121

Item #: 144169

Greenlee

Combination Drill/Tap Bits. 1/4-20NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

DTAP1/4-20 Split Drill

MFR: Greenlee

MFR #: DTAP1/4-20

UPC: 783310176169

Item #: 150493

Greenlee

Quick Change Carbide Tipped Hole Cutter 1-1/8" (28.6 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

645-1-1/8 Quick-Change Hole Cutter, 1-1/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor

MFR: Greenlee

MFR #: 645-1-1/8

UPC: 783310056973

Item #: 159197

Greenlee

Combination Drill/Tap Bits. 6 Piece Drill/Tap Set, 6-32 TO 1/4-20. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

DTAPKIT Combination Split Point Drill Tap Kit With Quick-Change Adapter, 6 Pieces, #6-32 to 1/4-20 Tap Thread

MFR: Greenlee

MFR #: DTAPKIT

UPC: 783310176206

Item #: 146516

Greenlee

Ultra Cutter 1-3/8" (35 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

925-1-3/8 Ultra Hole Saw With Fixed Pockets, 1-3/8 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor

MFR: Greenlee

MFR #: 925-1-3/8

UPC: 783310101598

Item #: 167997

Greenlee

Quick Change Carbide Cutter Kit, 8 Piece Complete Solutions for 1/2" to 2" conduit. Fast, accurate holes in stainless steel, mild steel, iron, copper, brass, aluminum, fiberglass and plastic sheet. Extends tool life with reduced friction, torque and heat. Split point, cobalt-steel pilot drill eliminates walking and penetrates quickly. Precision engineered, tungsten carbide teeth for fast cutting of round, burr-free holes. Optimized carbide placement reduces friction and torque requires less force and generates less heat while cutting. Flange Stop for Safety prevents over-drilling. Ejector Spring automatic slug removal with every cut.

648 Quick-Change Hole Cutter Kit With Fixed Pockets, 7/8 in Dia Min Cutter, 2-1/2 in Dia Max Cutter, 8 Pieces, For Use With 1/2 to 2 in Conduit, Tungsten Carbide, Oxide Coated

MFR: Greenlee

MFR #: 648

UPC: 783310064015

Item #: 582231

Greenlee

Carbide-Tipped Hole Cutter 7/8" (22.2mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.

625-7/8 Hole Cutter, 7/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 625-7/8

UPC: 783310383260

Item #: 150286

Greenlee

Combination Drill/Tap Bits. 3/8-16NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

DTAP3/8-16 Split Drill

MFR: Greenlee

MFR #: DTAP3/8-16

UPC: 783310116288

Item #: 43401

Greenlee

GSB12 1-3/8 inch Metal Cutting Step Bit #12

MFR: Greenlee

MFR #: GSB12

UPC: 783310082033

Item #: 1206529

Greenlee

Recessed Light Hole Saw Blade for the 35713 6-3/8" Holesaw.

35721 Replacement Blade, For Use With 35713 6-3/8 in Carbide Grit Recessed Light Hole Saw, Steel

MFR: Greenlee

MFR #: 35721

UPC: 783310357216

Item #: 86760

Greenlee

Combination Drill/Tap Bits. 10-24NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

DTAP10-24 Split Drill

MFR: Greenlee

MFR #: DTAP10-24

UPC: 783310176138

Item #: 45151

Greenlee

645-022 Quick Change Hole Saw Arbor, 1/2 in Shank

MFR: Greenlee

MFR #: 645-022

UPC: 783310057536

Item #: 145681

Greenlee

645-2 Quick Change 2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-2

UPC: 783310057031

Item #: 79203

Greenlee

Large Arbor with Pilot Drill for 1-3/8 to 2-1/2 Size Cutter

925-022 Large Hole Saw Arbor With Pilot Drill, 3/8 in Arbor, 3/8 in Shank, 1/4 in Dia x 1-1/2 in L Pilot Drill, HSS

MFR: Greenlee

MFR #: 925-022

UPC: 783310101857

Item #: 171259

Greenlee

625-1-1/8 1-1/8 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-1-1/8

UPC: 783310383284

Item #: 160193

Greenlee

Replacement Pilot Drill for Carbite-Tipped Hole Cutters. For cutters sized 3/4" - 2" (19mm - 50.8mm) using 3mm Hex Set Screw.

625-001 Replacement Pilot Drill Bit With Fixed Pockets, 1/4 in Shank, 1-45/64 in Pilot Drill, Cobalt Steel

MFR: Greenlee

MFR #: 625-001

UPC: 783310398721

Item #: 3744

Greenlee

34AR-6 Self-Feeding Spade Bit Kit, 3/8 in Min Drill Bit, 1 in Max Drill Bit, 6 Pieces, For Use With 1/4 in or Larger Power Drill, Steel

MFR: Greenlee

MFR #: 34AR-6

UPC: 783310037101

Item #: 122380

Greenlee

D'versiBIT Combination with Screw Point Auger Bit. 1/2" (12.7mm), 54" (1371.6mm) long with 3/16" (4.8mm) shaft diameter. For aggressive chip removal in many types of woods. Screw point for easy starting and pulling through wood With screw point removed, this bit can be ground to function like a standard combination bit.

08-03-54B DVersiBIT Type B Combination Auger Bit, 1/2 in Dia, 3/16 in Dia x 54 in L Shank, Screw Point, Uncoated

MFR: Greenlee

MFR #: 08-03-54B

UPC: 783310380986

Item #: 117056

Greenlee

35714 Recessed Light Recessed Light Hole Saw, 6-5/8 in Dia, 7/8 in D Cutting, Steel Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 35714

UPC: 783310357148

Item #: 65658

Greenlee

Carbide-Tipped Hole Cutter Kit. Contains 7/8", 1-1/8" and 1-3/8" cutter heads, pilot drill, hex key and case. Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.

635 Hole Cutter Kit, 5 Pieces, Carbide Tip

MFR: Greenlee

MFR #: 635

UPC: 783310035992

Item #: 38434

Greenlee

645-1-3/4 Quick Change 1-3/4 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-1-3/4

UPC: 783310057024

Item #: 45931

Greenlee

Large Split-Point Pilot Drill Prevents Walking. Makes Accurate Hole Placement Easy.

925-002 Large Pilot Drill Bit, 3/8 in Shank, 1/4 in Pilot Drill, HSS

MFR: Greenlee

MFR #: 925-002

UPC: 783310102113

Item #: 173362

Greenlee

Glo Stix Kit 3/16" x 15' (4.7mm x 4.6m) with Bullet and "J" Hook Nose Tips. Fish Stix Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. More flexible for fishing in walls through outlet box holes. Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4" (6.4 mm) Fish Stix. Clear, non-metalic storagetube keeps Glo Stix charged and ready to use. 200 lbs. (0.9 kN) maximum pulling strength. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip.

540-15 Glow Rod Kit, 15 ft L, 3/16 in Dia Pole, Fiberglass, Green

MFR: Greenlee

MFR #: 540-15

UPC: 783310114222

Item #: 177609

Greenlee

Hifgh Speed Steel Pilot Drill. 4-1/8" long, 1/4" diameter. Bulk pack of 50.

37623B Replacement Pilot Drill Bit With Fixed Pockets, High Speed Steel

MFR: Greenlee

MFR #: 37623B

UPC: 783310376248

Item #: 119648

Greenlee

Highly visible green color rods can be easily threaded together and seen when working above ceilings, down walls, or under raised floors. 1/4 IN (6.4 mm) diameter fiberglass adds rigidity when connecting multiple sections. 200 lbs. (0.9 kN) maximum pulling strength. Two different threaded tips accommodate various bundles of wire or cable Includes one 3 IN (0.9 mm) Glo Stix section for improved tip visibility.

540-24 Long Pulling Rod Kit, 24 ft L, 1/4 in Dia Pole, Fiberglass, Green

MFR: Greenlee

MFR #: 540-24

UPC: 783310105060

Item #: 1756

Greenlee

Nail Eater Extreme Shorty Wood Boring Auger Bit; 7/8 Inch, 7-5/8 Inch OAL, 5 Inch Flute

62PTS-7/8 Extreme Short Drill Bit, 7/8 in Dia, 7-5/8 in OAL, 7/16 in Shank

MFR: Greenlee

MFR #: 62PTS-7/8

UPC: 783310317968

Item #: 37907

Greenlee

Small Split-Point Pilot Drill Prevents Walking. Makes Accurate Hole Placement Easy.

925-001 Small Pilot Drill Bit, 3/8 in Shank, 3/16 in Pilot Drill, HSS

MFR: Greenlee

MFR #: 925-001

UPC: 783310101864

Item #: 172714

Panduit

Crimp Die for CT-920/930, 3/0 AWG Copper

Pan-Lug CD-920-3/0 CD-920 Crimp Dies, 3/0, Black Oxide, Steel, PK1

MFR: Panduit

MFR #: CD-920-3/0

UPC: 074983914456

Item #: 55970

Panduit

Crimp Die for CT-920/930, 500 kcmil Copp

Pan-Lug CD-920-500 CD-920 Crimp Dies, 500, Black Oxide, Steel, PK1

MFR: Panduit

MFR #: CD-920-500

UPC: 074983914517

Item #: 58020

Panduit

CD-920-500A Pan-Lug Crimp Die, 600 kcmil, Steel

MFR: Panduit

MFR #: CD-920-500A

UPC: 074983914548

Item #: 112892

Panduit

CT-3001/STBT Battery Powered Crimping Tools, 8 AWG to 600 kcmil Crimping, 6.7 Crimping, 4.9 in OAL

MFR: Panduit

MFR #: CT-3001/STBT

UPC: 613056817630

Item #: 1445533

Panduit

Crimp Die for CT-2001, 4/0 AWG Copper, 2

Pan-Lug CD-2001-4/0-SET CD-2001 Crimp Dies, 4/0, Black Oxide, Steel, PK1

MFR: Panduit

MFR #: CD-2001-4/0-SET

UPC: 613056309562

Item #: 1101426

Panduit

Crimp Die for CT-2001, 2/0 AWG Copper, #

CD-2001-2/0-SET CD-2001 Crimp Dies, 2/0, Black Oxide, Steel, PK1

MFR: Panduit

MFR #: CD-2001-2/0-SET

UPC: 613056309616

Item #: 1101425

Panduit

CD-2001-2-SET 2-Crimp Crimping Die Set, Steel

MFR: Panduit

MFR #: CD-2001-2-SET

UPC: 613056309555

Item #: 1031772

Panduit

CD-2001-1/0-SET 2-Crimp Crimping Die Set, Steel

MFR: Panduit

MFR #: CD-2001-1/0-SET

UPC: 613056309609

Item #: 1011273

Panduit

CD-2001-1-SET CD-2001 Crimp Dies, 1, Black Oxide, Steel, PK1

MFR: Panduit

MFR #: CD-2001-1-SET

UPC: 074983072590

Item #: 1496417

Filters