Skip to Main Content Skip to Footer Content

Main Content Starts Here

Motor Control

Showing 1 - 48 of 114 Items

filter_alt Filters (3)

Sort By

Per Page

Federal Signal

Littelfuse

PILZ

Brand (3)

Ways to Shop

Brand (3)

Ways to Shop

Sort By

Per Page

Littelfuse

No Image Available

Ground Fault Ground-Check Monitor

MFR: Littelfuse

MFR #: SE-105

UPC: 079458188233

Item #: 454484

Littelfuse

No Image Available

Solid State Timer

MFR: Littelfuse

MFR #: KSDB314SP

UPC: 079458995565

Item #: 150727

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 3 N/O, 1 N/C, 1 SC, Automatic/Monitored Start, UB 24 V AC/DC, 45 mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

774314 PNOZ X Safety Relay, 5/6 A, 3NO-1NC 3 Form A/1 Form B Contact, 24 V AC/DC V Coil

MFR: PILZ

MFR #: 774310

Item #: 180711

Littelfuse

The HRPS/HRIS Series combines an electromechanical relay output with microcontroller timing circuitry. It is a factory programmed module available in any 1 of 13 standard functions. It offers 12 to 240V operation in two universal ranges and factory fixed, onboard, or external adjustable time delays with a repeat accuracy of 0.5%. The output contact rating allows for direct operation of heavy loads, such as compressors, pumps, blower motors, heaters, etc. This series is ideal for OEM applications where cost is a factor. The HRPS has non-isolated SPDT relay contacts, and the HRIS has isolated SPDT relay contacts. Both offer the most popular timer functions in the industry. Operation (Interval): Upon application of input voltage, the time delay begins. The output (relay or solid state) energizes during the time delay. At the end of time delay the output de-energizes and remains de-energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.

HRPSD12HI Fixed Time Delay Relay, 2 hr Setting, 12 to 48 V DC, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: HRPSD12HI

UPC: 079458994063

Item #: 333183

Littelfuse

The 777 is a fully programmable electronic overload relay designed to protect any motor drawing 2-800 full load amps (external CTs are required above 90 amps). The 777 (family of products) is for 3-phase 200-480VAC applications, with several specialized units for other voltage ranges and unique applications. Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. Some unique applications include use with a Subtrol equipped Franklin submersible motor to detect high motor temperatures and applications where a fast linear trip is required. All of the overload relays provide unsurpassed protection by combining overload, voltage, phase loss and reversal, voltage and current unbalance, power monitoring, and underload based on current in one package. For standalone applications, the units incorporate a 3-digit LED display that is used for programming, providing real-time operational information and displaying diagnostic codes to aid in troubleshooting a fault condition. The units also feature a communications port that can be used with communication modules listed in the 777 accessories section to form a Modbus, DeviceNet Profibus, or Ethernet network. Up to 99 units can be remotely monitored and controlled from a PC, PLC, or SCADA system, and data logging through a PC with the optional Solutions software. This capability allows for a simple, cost-effective way to meet new requirements for arc-flash safety.

777-P2 Fully Programmable Overload Relay, 2 to 20 A, 1 Form C SPDT Contact Form

MFR: Littelfuse

MFR #: 777-P2

UPC: 079458991116

Item #: 1403467

Littelfuse

The 777 is a fully programmable electronic overload relay designed to protect any motor drawing 2-800 full load amps (external CTs are required above 90 amps). The 777 (family of products) is for 3-phase 200-480VAC applications, with several specialized units for other voltage ranges and unique applications. Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. Some unique applications include use with a Subtrol equipped Franklin submersible motor to detect high motor temperatures and applications where a fast linear trip is required. All of the overload relays provide unsurpassed protection by combining overload, voltage, phase loss and reversal, voltage and current unbalance, power monitoring, and underload based on current in one package. For standalone applications, the units incorporate a 3-digit LED display that is used for programming, providing real-time operational information and displaying diagnostic codes to aid in troubleshooting a fault condition. The units also feature a communications port that can be used with communication modules listed in the 777 accessories section to form a Modbus, DeviceNet Profibus, or Ethernet network. Up to 99 units can be remotely monitored and controlled from a PC, PLC, or SCADA system, and data logging through a PC with the optional Solutions software. This capability allows for a simple, cost-effective way to meet new requirements for arc-flash safety.

777-LR-P2 3-Phase Overload Relay, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 777-LR-P2

UPC: 079458991048

Item #: 182434

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 3 N/O, 1 N/C, 1 SC, Automatic/Monitored Start, UB 120 V AC/24 V DC, 45 mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

774316 PNOZ X Safety Relay, 5/6 A, 3NO-1NC 3 Form A/1 Form B Contact, 120 V AC/24 V DC V Coil

MFR: PILZ

MFR #: 774316

Item #: 181435

Littelfuse

No Image Available

102A3 102A 3-Phase Monitor, 190 to 480 V AC, 10 A, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 102A3

UPC: 079458990058

Item #: 24880

Littelfuse

No Image Available

Current Transformer

MFR: Littelfuse

MFR #: CT200

UPC: 079458977660

Item #: 444012

Littelfuse

No Image Available

OT08PC OT Series Replacement Socket, 600 V AC, 10 A, 8 Pin

MFR: Littelfuse

MFR #: OT08PC

UPC: 079458997422

Item #: 162871

Federal Signal

Flasher, 120V for model AV1ST

Flasher, 120V for model AV1ST

MFR: Federal Signal

MFR #: K8285238A-01

UPC: 782979118756

Item #: 259285

Federal Signal

No Image Available

Flasher, 24V, for MSL

MFR: Federal Signal

MFR #: K8285237A

UPC: 782979114802

Item #: 145753

Littelfuse

No Image Available

Gf/Gc Term Assembly 5.6V 50W Tc

MFR: Littelfuse

MFR #: SE-TA6A

UPC: 079458989540

Item #: 531235

Littelfuse

The SE-325 Neutral-Grounding-Resistor Monitor is used on resistance-grounded systems up to 25 kV to monitor the integrity of the neutral-to-ground path and to detect ground faults. It measures current and voltage in a transformer or generator neutral-to-ground connection and continuity of the neutral-grounding resistor (NGR). The SE-325 coordinates these three measurements to detect a loose connection, corrosion, ground fault, or NGR failure, and provides one alarm or trip output contact.

SE-325 Neutral-Grounding-Resistor Monitor, 120 V AC, 0.5/4 A, NO Contact

MFR: Littelfuse

MFR #: SE-325

UPC: 079458988079

Item #: 1280879

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 7 N/O, 2 N/C, 2 SC, Automatic/Manual/Monitored Start and Automatic Start with Start-up Test, UB 24 V AC/ DC, 90 mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 7 N/O, 2 N/C, 2 SC, Automatic/Manual/Monitored Start and Automatic Start with Start-up Test, UB 24 V AC/ DC, 90 mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

MFR: PILZ

MFR #: 774609

Item #: 111337

PILZ

PNOZsigma Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 V DC, 22.5 mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates, Light Guard

PNOZsigma Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 V DC, 22.5 mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates, Light Guard

MFR: PILZ

MFR #: 750104

Item #: 519846

Littelfuse

The ALT alternating relays are used to alternate between two loads. The ALT is commonly used in duplex pumping applications to balance the runtime of both pumps. The ALT-S is used in single high-level float applications. When the float switch opens, the alternating relay changes state, forcing the other pump to run the next time the float closes. All ALT relays have a built-in debounce feature that prevents the relay from changing state if the switch or float contact bounces momentarily. The ALT-X has an internal cross-connected relay and is used in dual high-level float applications. These floats are commonly referred to as lead and lag floats. The pumps alternate as in the ALT-S version but the crossconnected relay configuration allows both pumps to run simultaneously when both the lead and lag floats are closed. These relays are also available with a built-in switch (SW option) that is used to manually force one of the pumps to run every time the float switch is closed. This is helpful when a pump has been removed for repair or for test purposes. In the case of the ALT-X-SW, the switch essentially forces one pump to be the lead pump, while still allowing the second to run when both floats are closed. Must use the OT08PC socket for UL Rating!

ALT-115-S-SW Symcom Alternating Relay With Manual/Automatic Switch, 40 mA, 8 Pin, 1 Form C SPDT Contact, 95 to 125 VAC V Coil

MFR: Littelfuse

MFR #: ALT-115-S-SW

UPC: 079458991314

Item #: 1382862

PILZ

Contact Expansion, 1/2-Channel Wiring Without Detection of Shorts Across Contacts, 4 N/O, UB 24 VDC, 22.5mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

Contact Expansion, 1/2-Channel Wiring Without Detection of Shorts Across Contacts, 4 N/O, UB 24 VDC, 22.5mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

MFR: PILZ

MFR #: 777587

Item #: 1618524

Littelfuse

The 102A is a 3-phase, auto-ranging, dual-range voltage monitor that protects 190-600VAC, 50/60Hz motors regardless of size. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically selects between the 200V and 400V range. A unique microcontroller-based voltage and phase-sensing circuit constantly monitors the 3-phase voltages to detect harmful power line conditions. When a harmful condition is detected, the output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to acceptable levels. The Model 102A includes advanced single LED diagnostics. Five different light patterns distinguish between faults and normal conditions.

102A Symcom 3-Phase Phase Monitoring Relay, 190 to 480 V AC, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 102A

UPC: 079458990034

Item #: 145443

PILZ

PNOZsigma Safety Relay, 1-Channel Wiring, Without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 VDC, 17.5mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates

PNOZsigma Safety Relay, 1-Channel Wiring, Without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 VDC, 17.5mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates

MFR: PILZ

MFR #: 750102

Item #: 1638205

Littelfuse

Used On Systems Up To 1 kV.

ER-600VC Sensing Resistor, 600 V AC Voltage, For Use With POWR-GARD SE-330, SE-325 and SE-330AU Series Ground Fault Relay

MFR: Littelfuse

MFR #: ER-600VC

UPC: 079458977950

Item #: 450698

PILZ

PNOZsigma Contact Expansion, 4 N/O, 1 N/C, UB 24 VDC, 17.5 mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

PNOZsigma Contact Expansion, 4 N/O, 1 N/C, UB 24 VDC, 17.5 mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

MFR: PILZ

MFR #: 750107

Item #: 630828

PILZ

Safety Relay, 1/2-Channel Wiring with Detection of Shorts Across Contacts, 7 N/O, 2 N/C, 2 SC, Automatic/Monitored Start, UB = 24 VDC, 90mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

Safety Relay, 1/2-Channel Wiring with Detection of Shorts Across Contacts, 7 N/O, 2 N/C, 2 SC, Automatic/Monitored Start, UB = 24 VDC, 90mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

MFR: PILZ

MFR #: 774605

Item #: 182632

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates, with 2 Delay-on De-Energization Contacts

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates, with 2 Delay-on De-Energization Contacts

MFR: PILZ

MFR #: 774500

Item #: 418013

PILZ

Safety Relay, 1/2-Channel Wiring with/without detection of Shorts Across Contacts, 2 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates, with 2 Delay-on De-Energization Contacts, Delay Time Adjustable

Safety Relay, 1/2-Channel Wiring with/without detection of Shorts Across Contacts, 2 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates, with 2 Delay-on De-Energization Contacts, Delay Time Adjustable

MFR: PILZ

MFR #: 774502

Item #: 1552481

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 7 N/O, 1 N/C,1 SC, Automatic/Manual/Monitored Start, Start-up Test, UB = 110-120 V AC/24 V DC, 90mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates, Feedback Loop

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 7 N/O, 1 N/C,1 SC, Automatic/Manual/Monitored Start, Start-up Test, UB = 110-120 V AC/24 V DC, 90mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates, Feedback Loop

MFR: PILZ

MFR #: 774085

Item #: 523235

Littelfuse

No Image Available

Neutral-Grounding-Resistor Monitor

MFR: Littelfuse

MFR #: SE-330-00-00

UPC: 079458988321

Item #: 765562

Littelfuse

No Image Available

NDS-11 NDS Socket, 300 V AC, 10 A, 8 Pin

MFR: Littelfuse

MFR #: NDS-11

UPC: 079458997125

Item #: 602774

Littelfuse

No Image Available

3-Phase Plug-In Voltage Monitor 190-480Vac, 50/60Hz

MFR: Littelfuse

MFR #: 201A-AU

UPC: 079458990232

Item #: 1268612

Littelfuse

The TDUB Series combines digital timing circuitry with universal voltage operation. Voltages of 24 to 240VAC and 12 to 24VDC are available in three ranges. The TDUB Series offers DIP switch selectable time delays ranging from 0.1 seconds to 102.3 minutes in three ranges. Its 1A rated output, ability to operate on multiple voltages, and wide range of switch selectable time delays make the TDUB Series an excellent choice for process control systems and OEM equipment. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output energizes. The time delay begins when the initiate switch is opened (trailing edge triggered). The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.

TDUB3000A Digital Timing Circuitry Solid State Relay Timer, 1 to 1023 s Setting, 1NO 1 Form A SPST Contact

MFR: Littelfuse

MFR #: TDUB3000A

UPC: 079458006773

Item #: 185186

Littelfuse

The FS300 Series of solid-state flashers were specifically designed to operate lamp loads. Their two-terminal series connection feature makes installation easy. The high immunity to line noise and transients makes the FS300 Series ideal for moving vehicle applications. All solid-state construction means reliability and long life. The FS300 Series offers a factory fixed flash rate of 75 FPM or may be ordered with a fixed, custom flash rate ranging from 60 to 150 FPM. Operation: Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2.

FS324 FS300 Solid State Flasher, 2.5 A, 24 V DC V Coil

MFR: Littelfuse

MFR #: FS324

UPC: 079458993554

Item #: 32685

PILZ

Contact Expansion, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 8 N/O, 1 N/C, UB = 110 -120 VAC, 90mm

Contact Expansion, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 8 N/O, 1 N/C, UB = 110 -120 VAC, 90mm

MFR: PILZ

MFR #: 774143

Item #: 180000

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 3 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates with 2 Delay-on De-Energization Contacts, Release Time 0.5s Fixed

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 3 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates with 2 Delay-on De-Energization Contacts, Release Time 0.5s Fixed

MFR: PILZ

MFR #: 774544

Item #: 1394909

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 Safety Outputs, 1 Auxiliary Output in SC Technology, Automatic/Monitored Start, UB = 24 VDC, 22.5mm, Plug-in Terminals of Screw Type, Connection Between Several Devices, Monitoring of E-STOP, Safety Gates, Feedback Loop

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 Safety Outputs, 1 Auxiliary Output in SC Technology, Automatic/Monitored Start, UB = 24 VDC, 22.5mm, Plug-in Terminals of Screw Type, Connection Between Several Devices, Monitoring of E-STOP, Safety Gates, Feedback Loop

MFR: PILZ

MFR #: 774133

Item #: 831934

PILZ

Configurable Safe Small Controllers PNOZmulti 2, Base Unit, Expandable, 20 Safe Digital Inputs, 4 Safe Semiconductor Outputs

772100 PNOZmulti 2 Safety Relay, 6 A, 24 V DC V Coil

MFR: PILZ

MFR #: 772100

Item #: 1249753

Littelfuse

50-W ground-check termination assembly with convenient mounting holes and screw terminals.

SE-TA12A Termination Assembly With Convenient Mounting Hole, Screw Terminal, 12 V AC, 50 W, For Use With SE-135 and SE-145 Ground Fault Protection Relay

MFR: Littelfuse

MFR #: SE-TA12A

UPC: 079458989489

Item #: 482948

Littelfuse

No Image Available

SE-134C-XGC-00 SE-134C Relay, 120 to 240 V AC, 50 to 60 Hz Frequency

MFR: Littelfuse

MFR #: SE-134C-XGC-00

UPC: 079458809107

Item #: 228293

PILZ

PNOZsigma Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 VDC, 22.5 mm, Plug-in Spring-Loaded Terminals, Monitoring of E-STOP, Safety Gates, Lightguard

PNOZsigma Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 VDC, 22.5 mm, Plug-in Spring-Loaded Terminals, Monitoring of E-STOP, Safety Gates, Lightguard

MFR: PILZ

MFR #: 751104

Item #: 503861

PILZ

Safety Relay, 1/2-Channel Wiring with/without detection of Shorts Across Contacts, 3 N/O, 1 N/C,1 SC, Automatic/Monitored Start, UB = 24 V AC/DC, 45mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates Sidewards Compatibility with PNOZ X3

Safety Relay, 1/2-Channel Wiring with/without detection of Shorts Across Contacts, 3 N/O, 1 N/C,1 SC, Automatic/Monitored Start, UB = 24 V AC/DC, 45mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates Sidewards Compatibility with PNOZ X3

MFR: PILZ

MFR #: 787314

Item #: 1587134

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 Safety Outputs, 1 Auxiliary Output in SC Technology, Delayed Automatic/Monitored Start, UB = 24 VDC, 22.5mm, Plug-in Terminals of Screw Type, Monitoring of E-STOP, Safety Gates, Feedback Loop

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 Safety Outputs, 1 Auxiliary Output in SC Technology, Delayed Automatic/Monitored Start, UB = 24 VDC, 22.5mm, Plug-in Terminals of Screw Type, Monitoring of E-STOP, Safety Gates, Feedback Loop

MFR: PILZ

MFR #: 774131

Item #: 1596951

Littelfuse

No Image Available

Remote Indication-And-Reset

MFR: Littelfuse

MFR #: RK-105

UPC: 079458987768

Item #: 454504

Littelfuse

No Image Available

5.6V, 5W Termination Device, Axial Lead

MFR: Littelfuse

MFR #: 1N5339B

UPC: 079458859478

Item #: 1219827

Littelfuse

The 460 is a 3-phase voltage monitor that protects 190-480VAC or 475-600V, 50/60Hz motors regardless of size. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically senses line voltage. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions such as low, high, and unbalanced voltage, loss of any phase, and phase reversal. When a harmful condition is detected, the 460 output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for a specified amount of time (restart delay). The trip and restart delays prevent nuisance tripping due to rapidly fluctuating power line conditions. All 460 models feature adjustable 1-30 second trip delay, 1-500 second restart delay, 2-8% voltage unbalance trip point, and one form C contact except where noted.

460-VBM Symcom MotorSaver 3-Phase Voltage Monitoring Relay, 190 to 480 V AC, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 460-VBM

UPC: 079458990645

Item #: 1012979

PILZ

PSSu, Base Module for Electronic Modules, Periphery, C-rail, 1-Row, 6 Connection Levels, 12 Terminals, Spring-Loaded Connection

PSSu, Base Module for Electronic Modules, Periphery, C-rail, 1-Row, 6 Connection Levels, 12 Terminals, Spring-Loaded Connection

MFR: PILZ

MFR #: 312623

Item #: 1532729

PILZ

PNOZsigma Contact Expansion, 2 N/O, 1 SC, UB 24 VDC, 12.5mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

PNOZsigma Contact Expansion, 2 N/O, 1 SC, UB 24 VDC, 12.5mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

MFR: PILZ

MFR #: 750108

Item #: 1545190

Littelfuse

Used when replacing an Atkinson Omser II with an SE-130-Series Monitor.

PMA-8 Retrofit Adapter Plate, Panel Mount, M4x12 Mounting Screw, For Use With SE-134, SE-134C, SE-135 Relay, Panel Mount Adapter

MFR: Littelfuse

MFR #: PMA-8

UPC: 079458978421

Item #: 1008517

Littelfuse

Remote indication and reset for the SE-330, SE-330AU, and SE-330HV. NEMA 4 and NEMA 13 rating. Standard 22-mm mounting.

RK-332 Remote Indication/Reset Assembly, NEMA 4/13, 22 mm Standard Mount, For Use With SE-330/SE-330HV High Voltage Neutral Grounding Resistor and SE-330AU Neutral Earthing Resistor, Motor Protection Relay

MFR: Littelfuse

MFR #: RK-332

UPC: 079458987836

Item #: 1204732

Littelfuse

The EFCT series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.

EFCT-1 High Quality Ground Fault Current Transformer With 6 m Cable, 3.2 in, 100:1, 600 V AC Insulation Level, 5 A, 3% at 0.01 VA Accuracy, 50 to 400 Hz, -67 to 140 deg F Temperature, Screw Mount

MFR: Littelfuse

MFR #: EFCT-1

UPC: 079458977684

Item #: 534791