Skip to Main Content Skip to Footer Content

Main Content Starts Here

Motor Control

Showing 49 - 92 of 92 Items

filter_alt Filters (1)

Sort By

Per Page

Littelfuse

Brand (1)

Ways to Shop

Brand (1)

Ways to Shop

Sort By

Per Page

Littelfuse

Panel-mounted analog am meter displays the Ground-Fault Current as a percentage of the set-point.

PGA-0500 Panel Mount Analog Percent Current Meter

MFR: Littelfuse

MFR #: PGA-0500

UPC: 079458178173

Item #: 1022868

Littelfuse

The SE-330 is an advanced ground-fault and neutral-groundingresistor monitoring relay that is compliant with Rule10-302 of the 2018 Canadian Electrical Code Part I (CE Code). It measures neutral current, neutral-to-ground voltage, and neutral-to-ground resistance. It provides continuous monitoring of the neutral-to-ground path to verify that the neutral-grounding resistor (NGR) is intact and that it has not been bypassed or shorted. An open NGR renders currentsensing ground-fault protection inoperative and could result in a false belief that the system is functioning properly. A shorted NGR results in higher-than-expected ground-fault current. The SE-330 can be used with low- and medium-voltage transformers and generators with low- or high-resistance grounding used in processing, manufacturing, chemical, pulp and paper, petroleum, and water-treatment facilities. For high-voltage applications, use the SE-330HV. For applications that require conformance to Australian standards, use the SE-330AU.

SE-330-03-01 Continuous Universal Neutral Grounding Resistor Monitor Relay, 120 V AC/240 V DC, 4 to 20 mA Analog Output, 1 Form A, 1 Form B, 2 Form C Output Contact

MFR: Littelfuse

MFR #: SE-330-03-01

UPC: 079458988420

Item #: 1502618

Littelfuse

The PHS Series is an ideal method of changing lamp intensity, varying the speed of a fan/motor, or controlling the temperature of a heater. The effective output voltage is adjusted with an accessory external potentiometer suitable for line voltage applications. Operation: Upon application of input voltage, effective output voltage can be varied by changing the external resistance value. As the external resistance increases, the effective output voltage decreases. The inverse is also true.

PHS230A20 Phase Control Relay, 20 A, 1NO 1 Form A SPST Contact

MFR: Littelfuse

MFR #: PHS230A20

UPC: 079458997859

Item #: 200571

Littelfuse

The TRU Series is a multifunction, knob adjustable, Universal Time Delay Relay. It includes six of the most popular timing functions selected by a slide switch. The time delay is knob adjustable and the time delay range is switch selectable. The repeat accuracy is + 0.1%. Both function and time range can be selected on the top face of the unit. In addition to multifunctioning and multiple time ranges, the TRU Series features universal input voltage; 19 to 264VAC and 19 to 30VDC and full 10A output relay. The TRU Series can directly replace up to 1000 competitive time delay relay models. Operation: A six position slide switch selects delay-on-make, interval, single shot, recycling (ON time first, equal recycle delays), delay-on-break, and retriggerable single shot. 8-pin DPDT base wiring is limited to delay-on-make, interval, and recyclingfunctions. All six functions are available in the 8-pin SPDT and 11-pin DPDT versions.

TRU2 Adjustable Digital Integrated Circuitry Universal Time Delay Relay, 19 to 264 V AC/19 to 30 V DC, 8 Pin, 1 Form C SPDT Contact, 1 Pole

MFR: Littelfuse

MFR #: TRU2

UPC: 079458012156

Item #: 98301

Littelfuse

The ISS-105 is a smart five-channel intrinsically safe relay and pump controller. The ISS-105 can be configured for a wide variety of applications including alternating or non-alternating duplex, duplex separate pump stop (SPS), triplex and quadplex applications. It can be set up for pump-up or pump-down applications or can be used as a five-channel relay. The ISS-105 has a long list of features that are needed for multiple pump applications. The ISS-105 can indicate low, high and out-of-sequence alarms. If an out-of-sequence alarm occurs, the skipped pump(s) will be started as intended. The Model ISS-105 can be set up to do non-alternating control, alternating control and alternating control with one non-alternating pump. The non-alternating pump is intended for use with an emergency or jockey pump. The ISS-105 can start an emergency pump once every 50 cycles to keep it working freely. Using the built-in DIP switches, individual pumps can be disabled when taken out of service for repair or maintenance.

ISS-105 Symcom PumpSaver 5-Channel Intrinsically Safe Switch/Pump Controller

MFR: Littelfuse

MFR #: ISS-105

UPC: 079458994315

Item #: 1569571

Littelfuse

The SE-330 is an advanced ground-fault and neutral-groundingresistor monitoring relay that is compliant with Rule10-302 of the 2018 Canadian Electrical Code Part I (CE Code). It measures neutral current, neutral-to-ground voltage, and neutral-to-ground resistance. It provides continuous monitoring of the neutral-to-ground path to verify that the neutral-grounding resistor (NGR) is intact and that it has not been bypassed or shorted. An open NGR renders currentsensing ground-fault protection inoperative and could result in a false belief that the system is functioning properly. A shorted NGR results in higher-than-expected ground-fault current. The SE-330 can be used with low- and medium-voltage transformers and generators with low- or high-resistance grounding used in processing, manufacturing, chemical, pulp and paper, petroleum, and water-treatment facilities. For high-voltage applications, use the SE-330HV. For applications that require conformance to Australian standards, use the SE-330AU.

SE-330-03-00 Continuous Universal Neutral Grounding Resistor Monitor Relay, 120 V AC/240 V DC, 4 to 20 mA Analog Output, 2 Form A, 2 Form C Output Contact

MFR: Littelfuse

MFR #: SE-330-03-00

UPC: 079458988413

Item #: 1445479

Littelfuse

The PC-102 series is a dual-channel switch that provides dual protection against seal failures and over-temperature in submersible pumping applications. The relays have two form-C isolated output relays and two LEDs, which illuminate when each associated output relay is energized. The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays will change state. The sensitivity for the over-temperature detector can be set to 4k Ohms with use of the DIP switches.

PC-102CICI-LT 2 Form C Dual Seal Leak and Over Temperature Detector, 120 V AC, 2.08 in W x 2.35 in D

MFR: Littelfuse

MFR #: PC-102CICI-LT

UPC: 079458997699

Item #: 595113

Littelfuse

No Image Available

355-400 Symcom 3-Phase Voltage Monitoring Relay, 475 to 600 V AC, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 355-400

UPC: 079458989816

Item #: 177013

Littelfuse

Operates on AC ungrounded systems. The EL3100 is a self-powered ground-fault and phase voltage indication system for 3-phase systems. The EL3100 meets the National Electrical Code (NEC, Article 250.21(B)) and the Canadian Electrical Code (CEC) requirements for ground detectors for ungrounded alternating-current systems. Voltage connections are provided on the EL3100 for 208, 240, 480, and 600-V systems. Three green LEDs on the EL3100 indicate the presence of phase-to-ground voltage and one red LED indicates a ground fault. The EL3100 can operate stand-alone or with up to five remote LED indicators. A solid-state relay output provides indication of a ground fault. The output relay is closed when the 3-phase neutral voltage shifts as the result of ground leakage.

EL3100-00 Self-Powered Ground-Fault/Phase-Voltage Indicator, 208/240/480/600 V AC, DIN Rail Mount

MFR: Littelfuse

MFR #: EL3100-00

UPC: 079458825527

Item #: 738995

Littelfuse

The 460 is a 3-phase voltage monitor that protects 190-480VAC or 475-600V, 50/60Hz motors regardless of size. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically senses line voltage. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions such as low, high, and unbalanced voltage, loss of any phase, and phase reversal. When a harmful condition is detected, the 460 output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for a specified amount of time (restart delay). The trip and restart delays prevent nuisance tripping due to rapidly fluctuating power line conditions. All 460 models feature adjustable 1-30 second trip delay, 1-500 second restart delay, 2-8% voltage unbalance trip point, and one form C contact except where noted.

460-15 Symcom MotorSaver 3-Phase Voltage Monitoring Relay, 190 to 480 V AC, 1NO 1 Form A SPST Contact

MFR: Littelfuse

MFR #: 460-15

UPC: 079458990522

Item #: 465110

Littelfuse

No Image Available

RK-310R-01 Ground-Fault Status Remote LED Label, Red Indication, For Use With EL3100 Series Self-Powered Ground-Fault and Phase-Voltage Indication System

MFR: Littelfuse

MFR #: RK-310R-01

UPC: 079458825510

Item #: 1499413

Littelfuse

The SE-CS30 series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.

SE-CS30-8 Ground Fault Current Transformer With Flux Conditioner, 200 mm, 600:1, 600 V AC Insulation Level, 3% at 0.06 VA Accuracy, 50 to 400 Hz, -67 to 140 deg F Temperature, Screw Mount

MFR: Littelfuse

MFR #: SE-CS30-8

UPC: 079458989267

Item #: 1475951

Littelfuse

The FA and FS Series Flashers have proven their reliability through years of use on communication towers, smoke stacks, cooling towers, tall buildings, bridges and utility towers. The highest quality components are encapsulated in a rugged plastic housing with a molded-in heat transfer plate. The flash rate, ratio, and failsafe design meet FAA regulations. Zero voltage switching can increase lamp life up to ten times. The FS155-30RF & FS165-30RF include superior RF filtering circuitry for use in high RF installations, including AM hot towers. Operation: FS Series - Flasher (OFF First), FA Series - Flashers & Aux. Modules: Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2.

FS127 FS100 Low Current Flasher, 2 A, 120 V AC Coil

MFR: Littelfuse

MFR #: FS127

UPC: 079458993394

Item #: 1482444

Littelfuse

No Image Available

ELCT30-31 ELCT Sensitive Transformer, 600:1 Current Ratio, 600 V, 50 to 400 Hz

MFR: Littelfuse

MFR #: ELCT30-31

UPC: 079458232684

Item #: 1204731

Littelfuse

No Image Available

AF0500-00 AF0500 Protection Arc Flash Relay, 750 mA, NO-NC Contact

MFR: Littelfuse

MFR #: AF0500-00

UPC: 079458845310

Item #: 1069006

Littelfuse

No Image Available

50R200 1-Phase Monitor, 190 to 240 V AC, 10 A, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 50R200

UPC: 079458990706

Item #: 1407332

Littelfuse

No Image Available

LLC54AA LLC5 Dual-Probe Level Control, 120 V AC, 2.39 in W x 1.78 in D

MFR: Littelfuse

MFR #: LLC54AA

UPC: 079458996357

Item #: 1553524

Littelfuse

No Image Available

LLC52BA LLC5 Dual-Probe Level Control, 24 V AC, 2.39 in W x 1.78 in D

MFR: Littelfuse

MFR #: LLC52BA

UPC: 079458996340

Item #: 1475434

Littelfuse

3PH VM/380-480V/adj.RD/DPDT 480V Relay. The 350 is a heavy-duty voltage monitor. This product should be used when high current relays or dual contacts are required, or 480V controls are used. Since the 350 uses heavy-duty relays, it comes in fixed voltage range models rather than a dual autoranging version like the Model 250. The 350-200 has a 15A general purpose contact. The 350-400 provides a SPDT (Form C) relay rated to switch up to 600V, allowing the use of 480V controls, eliminating the need for a control power transformer to step the voltage down to 120-240V. Several DPDT (two Form C contacts) relay models are also available. The 350 microcontroller-based family of products are low cost yet highly advanced solutions to heavy-duty problems. The 350 includes advanced single LED diagnostics. Five different light patterns distinguish faults and normal operating conditions. Other options such as high voltage trip and adjustable restart delay are available.

350-400-2-5 Symcom 3-Phase Fixed Trip Heavy Duty Variable Restart Delay Voltage Monitoring Relay, 380 to 480 V AC, DPDT Contact

MFR: Littelfuse

MFR #: 350-400-2-5

UPC: 079458989953

Item #: 1521030

Littelfuse

The 201A is a 3-phase, auto-ranging, dual-range voltage monitor that protects 190-480VAC, 50/60Hz motors regardless of size. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically selects between the 200V and 400V range. The 201A includes advanced single LED diagnostics, where color and different light patterns distinguish between faults and normal conditions.This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions. When a harmful condition is detected, the 201As output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to acceptable levels.

201A-9 Symcom MotorSaver 3-Phase Auto Ranging Dual Range Voltage Monitoring Relay, 190 to 480 V AC, 8 Pin, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 201A-9

UPC: 079458990225

Item #: 433950

Littelfuse

The 460-15-100-SLD is a seal-leak detector to sense seal failures on submersible pumps. A microcontroller-based relay monitors the shaft seal of a submersible pump motor. A resistive probe is installed in the seal cavity. If water leaks into the pump, the resistance measured by the probe decreases. When the resistance drops below the sensitivity setpoint, the unit will trip and the relay contacts will change state. Output relay logic can be reversed by removing an external jumper. The unit will automatically reset when a fault is cleared.

460-15-100-SLD 1-Channel Seal Leak Detector, 110 to 120 V AC, LED Indicator

MFR: Littelfuse

MFR #: 460-15-100-SLD

UPC: 079458990546

Item #: 819808

Littelfuse

The SE-100T is a ground-fault-relay test unit designed to test the current pickup level of ground-fault protection. The tester injects current through the window of installed ground-fault current transformers to verify the operation of ground-fault monitors and relays. It is used on substations, motor control centers (MCCs), central distribution panels, switchboards, and test benches to verify relay operation. The SE-100T tests the entire ground-fault circuit including current transformers, wiring, ground-fault relay and the operation of the interrupting device. It is recommended to test every relay and its current interrupting device annually.

SE-100T Ground Fault Relay Tester, 120 V AC, 6.3 V AC Output Voltage, Surface Mount

MFR: Littelfuse

MFR #: SE-100T

UPC: 079458987867

Item #: 1566844

Littelfuse

The LSR-XXX load sensors use current levels to determine feed rates, tool wear, loss of prime on pumps, mixer viscosity and all types of overload and underload conditions. They may also be used to stage pump motors, chillers and other machinery. These devices combine a current transformer (CT) with Form C (SPDT) relay contacts to switch alarm circuits, contactors or any resistive or inductive load. One simple screwdriver adjustment will calibrate the sensor for all single-phase or 3-phase applications up to 100hp.

LSR-115 Symcom Load Sensor Relay, 115 VAC, 1 Form C SPDT

MFR: Littelfuse

MFR #: LSR-115

UPC: 079458996661

Item #: 543443

Littelfuse

The KRDB Series is a compact time delay relay measuring only 2 in. (50.8 mm) square. Its microcontroller timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRDB Series is a cost effective approach for OEM applications that require small size, isolation, reliability, and long life. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output relay energizes. The time delay begins when the initiate switch is opened. The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.

KRDB115M Fixed Time Delay Relay, 5 min Setting, 12 V DC, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: KRDB115M

UPC: 079458994513

Item #: 1305639

Littelfuse

The 233P is a single-phase pump monitor designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid cycle, overvoltage and undervoltage conditions. The 233P protects 230 volt, 2 or 3 wire, 1/3 to 3hp pumps. A calibration adjustment allows the 233P to be calibrated to your specific pumping applications, thereby reducing the possibility of false or nuisance tripping. A proprietary microcontroller based voltage, power factor and current-sensing circuit constantly monitors for power fluctuations, overcurrent and underload conditions. When an abnormality, such as loss of suction, is detected, the 233P deactivates its output relay and directly disconnects the pump motor. The relay then begins its user-selectable Restart Delay (dry-well recovery) timer. When the timer expires or power is removed and reapplied, the relay reactivates its output relay and allows the pump to turn back on. An infrared LED communicates directly with a hand-held diagnostic tool called the Informer (sold separately).

233P-1.5-ENCL Symcom PumpSaver 1-Phase Pump Protection Relay, 230 V AC, 1NO 1 Form A SPST Contact

MFR: Littelfuse

MFR #: 233P-1.5-ENCL

UPC: 079458990348

Item #: 1029249

Littelfuse

The TSD2 Series is designed for more demanding commercial and industrial applications where small size and accurate performance are required. The factory calibration for fixed time delays is within 1% of the target time delay. The repeat accuracy, under stable conditions, is 0.1% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 100 hours are available. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry. Operation (Interval): Upon application of input voltage, the time delay begins. The output is energized during the time delay. At the end of the time delay, the output de-energizes and remains de-energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.

TDS120AL Digital Integrated Circuitry Timing Relay, 1 to 1023 s Setting, 120 V AC, 8 Pin, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: TDS120AL

UPC: 079458999891

Item #: 1340233

Littelfuse

The TDB Series combines accurate digital circuitry with isolated, 10A, DPDT or SPDT contacts in an 8 or 11-pin plug-in package. The TDB Series features DIP switch selectable time delays ranging from 0.1-10,230 seconds in three ranges. The TDB Series is the product of choice for custom control panel and OEM designers. Operation (Delay-on-Break): Input voltage must be applied to the input before and during timing. Upon closure of the initiate switch, the output relay is energized. The time delay begins when the initiate switch is opened (trailing edge triggered). The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.

TDB120ALD Time Delay Relay, 1 to 1023 s Setting, 120 V AC, 11 Pin, 2 Form C DPDT Contact

MFR: Littelfuse

MFR #: TDB120ALD

UPC: 079458999471

Item #: 858653

Littelfuse

The SE-CS30 series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.

SE-CS30-26 Ground Fault Current Transformer, 26 mm, 600:1, 600 V AC Insulation Level, 3% at 0.06 VA Accuracy, 50 to 400 Hz, -67 to 140 deg F Temperature, Screw Mount

MFR: Littelfuse

MFR #: SE-CS30-26

UPC: 079458989205

Item #: 1390088

Littelfuse

The LSR-0 is a self-powered load sensor intended for use as a proof relay. It is used to verify that current is flowing as intended. It has a guaranteed 15A pull-in current and 2.5A drop-out current. Proof relays are typically used to interlock fans, compressors, motors, heating elements and other devices. The LSR-0 is self-powered, that is, it draws its power from the wire being monitored so it does not require separate control power wiring.

LSR-0 Symcom Load Sensor Relay, 15 to 135 A

MFR: Littelfuse

MFR #: LSR-0

UPC: 079458996654

Item #: 891266

Littelfuse

The 777/ 77C is a fully programmable electronic overload relay designed to protect any motor drawing 2-800 full load amps (external CTs are required above 90 amps). The 777-HVR-SP and 77C (family of products) are for single-phase 100-240VAC applications. Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. All of the overload relays provide unsurpassed protection by combining overload, underload, and voltage in one package. For standalone applications, the units incorporate a 3-digit LED display that is used for programming, providing real-time operational information and displaying diagnostic codes to aid in troubleshooting a fault condition. The units also feature a communications port that can be used with communication modules listed in the 777 accessories section to form a Modbus, DeviceNet, Profibus, or Ethernet network. Up to 99 units can be remotely monitored and controlled from a PC, PLC, or SCADA system, and data logging through a PC with the optional Solutions software. This capability allows for a simple, cost-effective way to meet new requirements for arc-flash safety.

77C 1-Phase Overload Relay, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 77C

UPC: 079458991192

Item #: 1261620

Littelfuse

Used On Systems Up To 1 kV.

INFORMER Remote Indication and Monitoring, 1 V AC 0.25 W, Infrared Signal, For Use With 1-ph PumpSaver, 94 HB ABS, Black

MFR: Littelfuse

MFR #: INFORMER

UPC: 079458994216

Item #: 1029250

Littelfuse

The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LEDs indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket. Operation: Alternating: When the rotary switch is in the alternate position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position A to lock Load A or position B to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate. Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the units input voltage (see connection diagrams on datasheet). Loss of input voltage resets the unit; Load A becomes the lead load for the next operation. Duplexing (Cross Wired): Duplexing models operate the same as alternating relays and when both the Control (S1) and Lag Load (S2) Switches are closed, Load A and Load B energize simultaneously. The DPDT 8-pin, cross-wired option, allows extra system load capacity through simultaneous operation of both motors when needed. Relay contacts are not isolated.

ARP43S Alternating Relay With Rotary Switch, 8 Pin, 2 Form C DPDT Contact, 120 VAC V Coil

MFR: Littelfuse

MFR #: ARP43S

UPC: 079458991475

Item #: 729753

Littelfuse

The ISS-102 is a two-channel, intrinsically-safe switch designed for multiple uses including a pump-up/pump-down (latching) controller or two-channel switch. Two LEDs indicate the state of the intrinsically-safe inputs and output relays and user-selectable options are available including a variable resistance threshold for float inputs. The ISS-102 enclosure is surface or DIN rail mountable. -LC Each input channel is active when the corresponding switch is closed. When the lag input (CH2) is activated, the output closes. Applying latching logic, the output contact remains closed until the lead (CH1) and the lag (CH2) inputs are deactivated. Sensitivity is fixed at 100kOhms with a debounce time delay of 2 seconds. -DCS This dual-channel switch has a debounce delay feature of 0.5 seconds. Resistance probes or switches can be used on its inputs. Two LEDs illuminate the output state of either form A relay. Sensitivity is fixed at 100kOhms with a debounce time delay of 0.5 seconds. -MC By selecting the proper functionality through the dip switches, you can define a pump-up or pump-down, single or dual channel non-latching switch. The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays (one form A & one form C) will change state, with a debounce time delay of 0.5 or 2 seconds.

ISS-102ACI-MC Symcom 2-Channel Multi-Function Intrinsically Safe Switch, 1 Form A/1 Form C Contact

MFR: Littelfuse

MFR #: ISS-102ACI-MC

UPC: 079458994278

Item #: 1371367

Littelfuse

Used On Systems Up To 5 kV.

ER-5KV Continuous-Duty Sensing Resistor, 2500 V AC, 125 mA, 20 kOhm, For Use With SE-330/SE-335 High Voltage Neutral Grounding Resistor and SE-330AU Neutral Earthing Resistor, Motor Protection Relay

MFR: Littelfuse

MFR #: ER-5KV

UPC: 079458977936

Item #: 1311635

Littelfuse

The FS300 Series of solid-state flashers were specifically designed to operate lamp loads. Their two-terminal series connection feature makes installation easy. The high immunity to line noise and transients makes the FS300 Series ideal for moving vehicle applications. All solid-state construction means reliability and long life. The FS300 Series offers a factory fixed flash rate of 75 FPM or may be ordered with a fixed, custom flash rate ranging from 60 to 150 FPM. Operation: Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2.

FS312 FS300 Solid State Flasher, 2.5 A, 12 V DC V Coil

MFR: Littelfuse

MFR #: FS312

UPC: 079458993547

Item #: 789423

Littelfuse

The PCR Series of photo control is a combination of precision electronic circuitry, electromechanical output, and unique molded plastic housing. Designed and built to meet the demands of the most rigorous requirement of tower and obstruction lighting control, each unit is factory calibrated to meet FAA and FCC specifications. Electronic circuit, output contactor, and terminal block are all contained within front plastic housing. Edge support molded into the bottom edge of housing allows easy wiring of new and existing installations. Available with or without cast aluminum junction box. Operation: When the amount of light sensed falls below the actuation level for energization, the output relay energizes. Conversely, when the amount rises above the actuation level for de-energization, the output relay de-energizes.

PCR11 Photo Electric Control With Aluminum Box, 120 V AC, Surface Mount, ABS

MFR: Littelfuse

MFR #: PCR11

UPC: 079458997750

Item #: 1366356

Littelfuse

The 460-100-SP is used on 95-120VAC, 50*/60Hz single-phase motors and the 190-240VAC, 50*/60Hz single-phase motors to protect them from damaging high and low voltage conditions. An adjustment knob allows the user to set a 1-500 second restart delay. The variable restart delay is also a power-up delay and can be utilized to stagger-start motors on the same system. A unique microcontroller-based, voltage-sensing circuit constantly monitors the voltage to detect harmful power line conditions. When a harmful condition is detected, the relays output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level and a specified amount of time has elapsed (restart delay). The trip delay prevents nuisance tripping due to rapidly fluctuating power line conditions.

460-200-SP MotorSaver 1-Phase Voltage Monitoring Relay, 190 to 240 V AC, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 460-200-SP

UPC: 079458990553

Item #: 878263

Littelfuse

The TSD2 Series is designed for more demanding commercial and industrial applications where small size and accurate performance are required. The factory calibration for fixed time delays is within 1% of the target time delay. The repeat accuracy, under stable conditions, is 0.1% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 100 hours are available. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry. Operation (Interval): Upon application of input voltage, the time delay begins. The output is energized during the time delay. At the end of the time delay, the output de-energizes and remains de-energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.

TSD24145S Fixed Time Delay Relay, 45 s Setting, 120 V AC, 1NO 1 Form A SPST Contact

MFR: Littelfuse

MFR #: TSD24145S

UPC: 079458020526

Item #: 866239

Littelfuse

The 460 is a 3-phase voltage monitor that protects 190-480VAC or 475-600V, 50/60Hz motors regardless of size. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically senses line voltage. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions such as low, high, and unbalanced voltage, loss of any phase, and phase reversal. When a harmful condition is detected, the 460 output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for a specified amount of time (restart delay). The trip and restart delays prevent nuisance tripping due to rapidly fluctuating power line conditions. All 460 models feature adjustable 1-30 second trip delay, 1-500 second restart delay, 2-8% voltage unbalance trip point, and one form C contact except where noted.

460-L Symcom Phase Monitoring Relay, 190 to 480 V AC, 1 Form C Contact

MFR: Littelfuse

MFR #: 460-L

UPC: 079458990607

Item #: 1148856

Littelfuse

3Ph Vm/380-480V/Adj.Vub,Td,Rd/2X480V Rly

3Ph Vm/380-480V/Adj.Vub,Td,Rd/2X480V Rly

MFR: Littelfuse

MFR #: 355-400-5

UPC: 079458989915

Item #: 876387

Littelfuse

No Image Available

1-Phase Pumpsaverplus / 230V

MFR: Littelfuse

MFR #: 233P-ENCL

UPC: 079458990355

Item #: 770036

Littelfuse

1-Ch Intrinsically-Safe Switch

1-Ch Intrinsically-Safe Switch

MFR: Littelfuse

MFR #: ISS-100

UPC: 079458994247

Item #: 943567

Littelfuse

No Image Available

Cross-Wired Alternating Relay 95-125V

MFR: Littelfuse

MFR #: ALT-115-X-SW

UPC: 079458991338

Item #: 1172127

Littelfuse

No Image Available

Term Assy Small Format Wl

MFR: Littelfuse

MFR #: SE-TA6ASF-WL

UPC: 079458989564

Item #: 665877